Skip to content
DCL Surveying & Mapping — De Casa-Laferriere

Service 03

Class A-2 Surveys

High-accuracy property and boundary surveys prepared in accordance with applicable Connecticut survey standards.

When a town, an attorney, or a lender in Connecticut asks for “an A-2 survey”, they are asking for a survey measured and mapped to an accuracy class the state sets in its regulations. It is the minimum class Connecticut allows for a property survey or a limited survey, which is why so many permits and closings call for it.

What's included

  • Research of the property's deed, filed maps, and adjoining records at the town clerk's office
  • Field survey measured to Class A-2 tolerances with robotic total stations and GNSS
  • Recovery of existing monuments, and setting new ones where the scope calls for it
  • Location of buildings and other improvements, with setbacks where a permit requires them
  • A survey map prepared to Connecticut's minimum standards for surveys and maps

When it's needed

  • Zoning and building permit applications for additions, garages, pools, and other improvements
  • Property purchases and sales, when an attorney or lender requests one
  • Planning, zoning board, or inland wetlands applications that need an accurate base map
  • Subdivisions, lot line revisions, and easement maps in Connecticut

What you receive

  • A Class A-2 survey map prepared to the Regulations of Connecticut State Agencies
  • Monuments recovered or set at corners, where included in the scope
  • PDF files, with CAD files and paper prints where the project or the town requires them

Class A-2 describes accuracy, not scope. The survey can be a full property survey or a limited one, such as an improvement location survey, depending on what the town or attorney needs to see.

Common questions

What is a Class A-2 survey?

A-2 is an accuracy class defined by the State of Connecticut, not a marketing term. The Regulations of Connecticut State Agencies set out classes of accuracy for surveys in § 20-300b-11, and Class A-2 requires positional accuracy of about a fiftieth of a foot, a ratio of error of closure of 1:5,000, tightening to 1:7,500 where distances exceed 150 feet, and angular measurement within 20 seconds.

Class A-2 is also the minimum accuracy Connecticut's standards allow for a property survey or a limited survey, so in practice it is the class most municipal submissions and property transactions call for. Tighter classes exist for control work, and Class D is not a field survey at all — it is a compilation of existing records.

If somebody has told you that you need an A-2, that is what they mean: a survey, full or limited, performed and mapped to that published standard, sealed by a licensed surveyor.

What is the difference between a property survey and a limited one?

A property or boundary survey establishes the whole boundary. It shows the position of every boundary line, the monumentation found or set at the corners, and the surveyor's full opinion of where the property is.

A limited survey answers a narrower question. Connecticut's standards, in § 20-300b-2 of the state regulations, recognize several — a zoning location survey, an improvement location survey, a boundary stake-out — each covering only what its purpose requires.

A limited survey is not a lesser one; it is a different scope. The right question is what the person asking for it needs to see, which is usually the first thing we establish.

Do I need a survey for a fence, pool, deck, shed, garage, or addition?

Often, yes. Requirements vary by municipality and project.

More questions and answers

Where we offer it

Related services

Know where you stand.

Send the property address and what the survey is for, or call and talk it through with a surveyor.